free shipping for breitling replica watches.

genuine swiss made piaget replica watch here.

https://www.linkreplicawatches.com/ up to save 70%.

high quality Fake Rolex, Best Replica Watch Site Online cheap sale.

Safe

SCP-2461

Aftermath

Connected to: SCP-1051

Special Containment Procedures

Following the accidental deaths of Dr. ██████████ and the remainder of the SCP-2461 research team, no further research into SCP-2461 is to be carried out without a unanimous consent of the O5 council. The remaining SCP-2461 artifacts are to be placed in High Security Containment at Armed Containment Site 2461. No access to SCP-2461 is to be permitted without unanimous consent of the O5 council. Anti-theft measures in place at Armed Containment Site 2461 are classified under Protocol 999-2461-Gernsback. Lethal force is authorized to prevent theft of SCP-2461 objects.


Description

SCP-2461 is a series of artifacts recovered from a crash site on ██-██-████.


SCP-2461-A: A disc-shaped device approximately 45 meters in diameter and 10.5 meters in height. Device's exterior is covered in a radar-absorbing material. Entrance and egress are possible through a dilating iris doorway in the central underside of the device, either by ladder, elevator, or roof-mounted gravity lift.

The interior of the device is divided into three levels, each approximately 3 meters in interior height. The topmost level (Deck 1) appears to be devoted to command and control, and includes a control center, observation dome, and navigation systems. The second level appears to be devoted to engineering and avionics, and includes the avionics, engine, and flight control systems. A small living quarters, including galley and cots, is also located on this level. The third level contains the remaining avionics and flight control systems, but is mostly made up of a toroidal fuel tank, containing approximately 40,000 liters of an unknown combustible liquid. At the moment of the writing of this article, 10,000 liters of fuel remain in the tank.

The underside of the device has six hemispherical protrusions located at regular intervals around the circumference of the disc. Each hemisphere shields a turreted X-ray laser in the 200 MW range. Guidance and firing are carried out either by the master gunnery control station on Deck 1, or by individual turret controls on Deck 3.

Three extendable struts are located at regular intervals on the underside of the device, and can be extended for landing.


SCP-2461-B: Ten instances of SCP-2461-B were found inside SCP-2461-A, labeled SCP-2461-B1 through SCP-2461-B10. At the time of the writing of this article, seven instances of SCP-2461-B (B1 through B7) have been destroyed through testing or accident, leaving three extant examples.

SCP-2461-B is an exoskeletal "powered armor" suit constructed of a highly sophisticated steel alloy. Each was originally worn by a different instance of SCP-2461-C before recovery, and was individually fitted to its wearer's physical characteristics. Experimentation has revealed that SCP-2461-B grants the user increased strength, that its armor plating is capable of repelling small arms fire up to and exceeding .50 BMG, and that it contains systems capable of life support in hard vacuum for extended periods of time.


SCP-2461-C1 through C12: The cremated remains of twelve individuals (eleven male, one female) who originally operated SCP-2461-A. At the present time, none of the SCP-2461-C instances have been positively identified. Autopsies carried out after the initial crash site recovery indicates that all ten individuals were killed [DATA EXPUNGED].


SCP-2461-D1 through D 10: Ten devices originally housed in leather holsters affixed to the exterior of each SCP-2461-B. Eight of these devices (SCP-2461-D1 through D8) were damaged beyond repair in the impact. One of the surviving devices was subsequently destroyed during the course of experimentation and testing, leaving one extant device remaining.

SCP-2461-D is an X-ray laser pistol in the 150 kW range. The emitter is located in the bulbous structure located just above the grip. The collimating "barrel" of the device is a hexagonal prism made of an artificial aluminum oxide crystal, protruding four inches from the emitter, surrounded by combination heat-sink and barrel shroud. The devices are rechargeable by 125 V alternating current, or by replacing the power pack located in the grip.


SCP-2461-E1 through E4: Four X-ray laser rifles in the 200 kW range. The construction is similar to that of SCP-2461-D, except that the power pack is located in a magazine well located forward of the trigger housing, the barrel has been extended to twelve inches and includes a forward hand grip made of walnut wood, and a rifle butt made of the same walnut wood has been attached to the rear of the laser emitter housing.


SCP-2461-F through Z: [DATA EXPUNGED UNDER SECURITY PROTOCOL 999-2461-GERNSBACK]


SCP-2461-ALEPH through HE: [DATA EXPUNGED UNDER SECURITY PROTOCOL 999-2461-GERNSBACK]